Telemetry Devices
To help you determine which receiver or keypad is suitable for your application, we have categorised our receivers and keypads
into fixed-based units (i.e. those that are screwed into the wall) and into portable units (i.e. those you can carry around with
your, which is useful if outside in the garden). Features and restrictions, such as the number of specific zone areas that can be
allocated to a particular receiver or keypad is described below:
Telic STD32
An easy-to-use telemetry module - ideal for remote surveillance and remote control via GSM. Includes a camera interface and onboard webserver.
The STD32 is a telemetry device that sends alarm alerts/messages via SMS or e-mail up to 5 recipients and can
be used for switching output relays on or off via a
telephone call, SMS or through the internet. The device includes 2 opto-
coupler inputs that can be used to monitor status information. The initial configuration of the STD32 telemetry module is simply
done with a single phone call. All further configuration settings can be made by sending SMS messages to the device or by using
the web-browser functionality.
Additionally the STD32 also provides a camera interface (a camera accessory is available as a separate optional purchase). With the help of the Telic Camera you can get digital pictures via e-mail in alarm situations or on request. Alternatively you can always retrieve a picture via the web-interface.
To be able to use this E-mail functionality your SIM Card needs to have a GPRS subscription; to use the web-browser functionality the SIM Card needs to have a fixed IP address.
Typical Configuration (click image to view)
Features
- Stand-alone Quad Band telemetry device
- Status-LEDs for inputs and outputs as well as for GSM network
- Bidirectional communication - possible to control the outputs and retrieve status
information from the inputs (via SMS or web-browser) - Control outputs with relays (6A at max. 230 V AC each)
- Two digital inputs with alarm functionality
- Optocoupler inputs (12V = "high", max. 10mA) with alarm messages to be sent
via SMS or e-mail
Teltonika MVC-100 EDGE Camera
An integrated GPRS/EDGE Camera with SMS text alerts and an Output Relay
The Teltonika MVC-100 EDGE Camera is a compact mobile surveillance and monitoring system that captures and
transmits high resolution video and single images via GPRS/EDGE networks. Images can be acquired automatically with programmable
period settings and/or upon external input triggers from PIR motion sensors or door contacts. The video and single images can be
viewed online with a PC or a handheld device, if the SIM card has a fixed IP address, or these video and images can be transmitted
to FTP-server or sent to an e-mail account.
SMS alert messages are sent to nominated contacts when an input trigger has been activated and will also sent text message alerts
if there is a power failure (a back-up battery is provided). The video and single images can also be recorded on a local microSD
card and later downloaded or reviewed via built-in Web server.
This integrated camera / alert system is ideal for remote surveillance and monitoring of temporary or distant sites or mobile
assets in places where no Internet connection is available.
Typical Configuration (click image to view)
Features
- Quad Band 850/900/1800/1900 MHz GPRS/EDGE network.
- Video clip (desirable time duration) and/or single snapshot images
- JPEG and MPEG-4 compression
- Pre-alarm function (ability to record footage before alarm sensor trigger)
- Images can be saved on a local microSD card
- Lens can be selected according to user requirements and needs
- Built-in microphone for audio surveillance
- Built-in Web server for monitoring via standard browser
Teltonika TWCT22
Monitors and controls remote equipment with SMS/Email functionality for alarm conditions.
The
DIN rail mountable TWCT22 is an advanced yet simplified Remote Terminal Unit (RTU) which relies on GSM networks and the supported
GPRS service for monitoring external devices and connecting sensor inputs (both analogue and digital). TWCT22 exploits the
benefits of this wireless technology and gives you control of your remote units from any part of this World.
Using an embedded feature rich web server interface, you can configure various parameters of TWCT22. Alarm conditions can be
configured for monitoring of these inputs. Since TWCT22 supports SMS and SMTP protocols, the device can be configured to send
SMS/Email whenever alarm conditions occur. TWCT22 also gives you the freedom to control the states of the connected outputs. By
sending a simple SMS you can change/get the status of the outputs.
The device is designed to fit within a single DIN mounted enclosure (purchased separately) as shown. All-in-all TWCT22 is an
advanced, effective and an economical solution for fulfilling your needs of remote monitoring and control applications.
Typical Configuration (click image to view)
Features
- Dual band: 900/1800 MHz
- 4 relay outputs (~250V, 7A, terminal blocks) to drive heavy loads
- Surge and reverse voltage protection on all the inputs.
- Two Analog inputs with mode selection, voltage mode (0-10V) or current mode
(4-20mA) - 4 digital inputs with configurable settings (“0” (false) 0 3V, “1” (true) 3-24V,
terminal blocks) - Turn ON/OFF the outputs by sending SMS
- Alarm message service over SMS or email
- Simple configuration through any web browser
- DIN rail mounting, for easy integration in industrial environment
- 4 LED‘s for input status, 4 LED‘s for output status
- 12-24V power supply, ideal for use in heavy duty vehicles like buses, trucks
- Watchdog controller ensures reliable and continuous operation
- RS232 hardware interface.
- Firmware upgrade possibility
